|
Window system with width of 60.8 mm. casement, 59.8 mm in the leaf.
Leaf concealed on exterior and with ledge over the interior part of encasement, following the most up-to-date architectural and technical lines.
Less aluminium surface seen than in the more traditional systems.
There is no difference in height between entryway and fixed setting.
Thermal bridge rupture design through profiles assembled with polyamide shims with fibreglass, possessing excellent properties of thermal insulation and mechanical resistance.
Closure system through central waterproof joint in EPDM, with high performance sealing as well as thermal and acoustic insulation.
Standard European chamber for housing of ironworks.
External chamber with channel for direct drainage to the exterior.
Perimeter weatherstripping for additional closure in interior of the leaf.
Adjusted and fixed to the wall through a polyamide spacer and an exterior perimeter weatherstripping with joint sealer support.
Incorporated joint sealer or attached through special polyamide pieces, with perimeter weatherstripping around at the wall union (interior or exterior).
Glazing with height of frame of 22 mm. and width up to 41.8 mm. in casements and 23 mm. in leaves.
Wide range of profiles which allow answers and solutions to the widest varieties of closure proposals.
Possibility for bicolour finishes, thanks to the thermal bridge rupture system.
The autocad file can only be downloaded with an active user session.
« Back
|
